class=”c23″> Another Android 4.3 Jelly Bean test firmware with build version XXUEMJ5 has been leaked for the Samsung Galaxy Note 2 bearing model number GT-N7100.
With the Android 4.3, Samsung has updated the UI elements, Which is more like the interface of the Galaxy Note 3 and the Galaxy S4 including the tabbed button settings.
Besides, Samsung Wallet and Samsung Knox Also included are added in the test firmware. However, the Android 4.3 is still going through development phases and Samsung is likely to add more features before releasing the final version.
Screenshot of Android 4.3 running on Galaxy Note 2nd
class=”c25″> Firmware details
Model: GT-N7100
Country: Open Asia
Version: Android 4.3 Jelly Bean
Chang List: 1903221
Build date: October 16, 2013
Product code: OLB
PDAs N7100XXUEMJ5
CSC N7100OLBMJ4
MODEM: N7100XXUEMJ5
class=”c23″> Until Samsung releases official update users can experience the leaked N7100XXUEMJ5 Android 4.3 test build on Their Galaxy Note 2 Following our step-by-step guide. It Should be noted That the N7100XXUEMJ5 is an unbranded version of the firmware and can be installed on any unlocked N7100 unit.
IBTimes UK reminds its readers That it will not be held liable for any damage to the device. Users Also included are advised to Verify Their handsets meet Following set of requirements.
Pre-requisites
1) Install USB Drivers for Samsung Galaxy Note 2 to connect the Android device with computer.
2) Enable USB Debugging Mode on phone to connect it with the computer and use the Android SDK with it. [Press Menu >> Settings >> Applications . From there navigate and click on Development option then check USB Debugging Mode .]
3) As the tutorial is likely to wipe out all the data of the phone, create a backup. If the device is having any custom recoveries Such as CWM / TWRP installed then backup data using the recovery.
4) The Note 2 shouldhave battery charge above 80%.
5) The device Should be factory unlocked and not locked to a Particular carrier.
6) The phone will lose custom ROM with the installation of official firmware. Also, the custom recovery will be replaced by R the stock recovery.
7) The device will no longer belong to a rooted version once official firmware is installed.
8) XXUEMJ5 Android 4.3 official firmware works only with Samsung Galaxy Note GT-N7100 2. As flashing this on any incorrect variant might brick the device, Verify the model number of Note 2 by navigating to Settings >> About phone >> Model number .
class=”c25″> Steps to install XXUEMJ5 Android 4.3 Jelly Bean on Galaxy Note N7100 2
Step 1: Download N7100XXUEMJ5 Android 4.3 Jelly Bean official firmware for Galaxy Note 2 to computer. Extract the downloaded firmware file to get
N7100XXUEMJ5_N7100OLBEMJ4_N7100XXUEMJ5_HOME.tar.md5 file
Step 2: Download Odin3.09 . Extract Odin zip to get Odin v3.09.exe in it
Step 3: Double-click to open the Odin3 v3.09.exe file to start Odin
Step 4: Restart the Galaxy Note 2 in to Download Mode . To do so, first power off the phone and wait for five to six seconds after the display is off. Press and hold Volume Down , Power and Home buttons together until a warning screen Appear. Then press the Volume Up button to continue to enter into Download Mode
Step 5: Connect the phone to computer using the USB cable while it is in Download Mode. The Successful connection will be indicated by an Added message in Odin and overpriced the one of the ID: COM box will turn blue with the COM port number.
Note: If the message does not Added Appear, try another ISB port located at the back side of the computer. If Odin still fails to Recognise the phone then reinstall the USB driver.
Step 6: Click the AP button in Odin and select N7100XXUEMJ5_N7100OLBEMJ4_N7100XXUEMJ5_HOME.tar.md5 file extracted EARLIER
Step 7: Under the Option section in Odin Verify Auto Reboot and F.Reset Time checkboxes are selected. Uncheck Re-Partition option
Step 8: Click the Start button in Odin to begin the installation
Step 9: A PASS message will Appear When The flashing is completed and the phone will restart Automatically. When The homescreen Appear, unplug the USB cable form the phone
Galaxy Note 2 Should now be updated and running on the leaked test build N7100XXUEMJ5 Android 4.3. Navigate to Settings >> About phone to Verify the firmware version of the device.
How to fix boot loop issue
If the device’s encounter with any issue, Such as FC or Bootlooop, with the firmware installation, then boot the phone into recovery mode. To do so, press and hold Volume Up , Home and Power buttons together. In recovery mode, perform data wiping box by Selecting Wipe data / factory reset . Then reboot the phone by Selecting reboot system now . In recovery mode, use Volume keys to scroll between options and Power button to select the Desired option. Note that performing wiping box will erase all data including internal SD card of the device.
[Source: Sammobile]
To report problems or to leave feedback about this article, e-mail:
To contact the editor, e-mail:
This article is copyrighted by IBTimes.co.uk, the business news leader
No comments:
Post a Comment