Samsung Galaxy Note GT-N7100 2 Units with Android 4.3 Jelly Bean Latest ... - International Business Times AU

class=”c9″> Samsung Galaxy Note 2 users can now upgrade to Android 4.3 Jelly Bean officially. They can now access the Over-the-Air or OTA update through Samsung KIES manual downloads or through Their handset’s system. However, for user who did not receive the notification or can not access the update via the Samsung KIES, can choose the manual download and installation. The Following sections providesprofessional a step-by-step guide.

Details of the N7100XXUEML6 Android 4.3 Firmware:

class=”unIndentedList”>
• PDAs N7100XXUEML6
• CSC N7100OLBEML1
• MODEM: N7100XXUEMK1
• Version: Android 4.3
• Build date: December 31, 2013

The upgrade can be overpriced accessed by users from the Following countries: Indonesia, Vietnam, Malaysia, Philippines, Singapore and Thailand .

Important note: Given the firmware is not in any fire, users with unlocked Galaxy Note 2 N7100 can use the update as well. Providers of the update can not be held Responsible for what happens to the device Following the installation. Users can update at Their Own Risk.

Requirements for the firmware:

class=”unIndentedList”>
• USB drivers for the Galaxy Note 2
• the back up of all important settings, personnel information and other data files.
• Enable USB debugging on the handset. To do this, go to Settings> Developer> Developer Options. Users must tap the build number seven times to reveal the right settings. Check the USB debugging box in the Settings and Developer Options.
• The device Should be charged at least 80%.
• The device must not be tied with any Particular carrier. It Should be unlocked.

Important downloads: Android 4.3 XXUEML6 Jellybean Firmware for Galaxy Note N7100 2 | Odin 3:07

Installation instructions:

1. Use winrar or winzip to extract the firmware zip file:. Tar.md5 file plus other files.

second Extract Odin zip file to access Odin3 v3.07.exe and other important files.

3rd Turn off the handset.

4th Boot the handset into Download Mode. Press and hold the Power and Volume Down buttons. Wait for the Android icon to show up. Use the Volume Up button to go into Download Mode.

5th Access Odin in the computer. Run it as administrator.

6. Connect the Galaxy Note 2 to the computer via USB. Wait for the Odin to detect the device. The ID: COM Should turn light blue alongwith the port number of the COM. The screen Should say the device was added successfully. Reinstall the USB drivers if this does not happen.

7. Choose the Following files from the firmware folder: (PDA. Tar.md5 files), Phone (MODEM), CSC (CSC), PIT (. Pit files). If there are no files then Proceed with the next step.

8. In Odin, allow Auto Reboot and Factory Reset. Confirm all.

9. Following installation the phone will restart.

Go to Settings, About Phone check to see if the firmware has been installed.

To contact the editor, e-mail: