class=”c25″> A new official build with base firmware XXDMF3 is now available to download for the international version of the Samsung Galaxy Note 2 bearing model number GT-N7100. The update is based on Android 4.1.2 Jelly Bean. It is a regular maintenance update with usual bug fixes for the device.
XXDMF3 Android 41.2 update is available for the Galaxy Note 2 .
class=”c27″> Firmware details
PDAs N7100XXDMF3
CSC N7100OJVDMH1
Version: Android 4.1.2 Jelly Bean
Build date: June 21, 2013
Regions supported: Austria, Belgium, France, Germany, Hungary, Italy, Spain and United Kingdom
The new official build is for the Note 2 users in Turkey, Which can be installed using Samsung Kies. As the XXDMF3 is an unbranded version of the firmware, it can be installed on any unlocked version of N7100 unit (except Those Which are from China, Hong Kong and Taiwan).
Those who wish to upgrade Their handset with the latest official firmware, May follow our step-by-step guide.
IBTimes UK reminds its readers That it will not be held liable for any damage to the device. Before installing the official firmware, users are advised to Verify That Their devices meet Following requirements.
class=”c28″> Pre-requisites
1) Install USB Drivers for Samsung Galaxy Note 2 to connect the Android device with computer.
2) Enable USB Debugging Mode on phone to connect it with the computer and use the Android SDK with it. [Press Menu >> Settings >> Applications . From there navigate and click on Development option then check USB Debugging Mode .]
3) As the tutorial is likely to wipe out all the data of the phone, create a backup. If the device is having any custom recoveries Such as CWM / TWRP installed then backup data using the recovery.
4) The battery of the Galaxy Note shouldhave charge above 80%.
5) The device Should be factory unlocked and not locked to a Particular carrier.
6) The phone will lose custom ROM with the installation of official firmware. Also, the custom recovery will be replaced by R the stock recovery.
7) The device will no longer belong to a rooted version once official firmware is installed.
8) XXDMF3 Android 4.1.2 official firmware works only with Samsung Galaxy Note GT-N7100 2. As flashing this on any other variant might brick the device, Verify the model number of Note 2 by navigating to Settings >> About phone >> Model number .
class=”c27″> Steps to install XXDMF3 Android 4.1.2 Jelly Bean on Samsung Galaxy Note N7100 2
Step 1: Download XXDMF3 Android 4.1.2 Jelly Bean for the Galaxy Note 2 to computer
Step 2: Extract the downloaded firmware zip using winrar/7zip/winzip or any other extracting tool to get a . tar.md5 file with few other files
Step 3: Download Odin v3.07 . Extract the Odin zip to get Odin3 v3.07.exe and some other files
Step 4: Turn off the Note 2 and wait for five to six seconds for vibration to confirm complete power off
Step 5: Place the phone into Download Mode by pressing and holding Volume Down , Home and Power buttons together until the Samsung logo or red and yellow text Appears on the screen. The winners of the Volume Up button to continue to enter Download Mode
Step 6: Run Odin3 v3.07.exe as Administrator
Step 7: Connect the Note 2 to computer using the USB cable while it is in download mode. Wait for sometime until Odin Detects the device. When the phone is connected successfully than Added message will Appear in Odin. Also, ID: COM box in Odin will turn blue with the COM port number, Indicating Successful connection
Note: If the Added message does not come then try another USB port, try the one located at the backside of the computer. If Odin still fails to Recognise the device then re-install the USB driver.
Step 8: Select These files extracted from N7100XXDMF3 folder to install on the phone
a) Click the PDA button and select the . tar.md5 file
b) Click the Phone button and select fileswith MODEM in its name
c) Click the CSC button and select fileswith CSC in its name
d) Click the PIT button and select the . Pit file
Note: Ignore the last three steps (step-b, c and d) if Such files do not exist.
Step 9: In Odin check Auto Reboot and F.Reset Time checkboxes are selected. But uncheck Re-Partition option; select it Only When a. Pit file is used
Step 10: Click the Start button in Odin. The installation process Should begin now and would take a few minutes to complete
Step 11: Once the installation process is completed, the phone will restart Automatically. The Successful installation will be indicated by a PASS message with green background in the extreme left box at the very top of Odin. Unplug the USB cable from the phone to disconnect it from the computer
Galaxy Note 2 Should now be updated with XXDMF3 Android 4.1.2 Jelly Bean official firmware. Head over to Settings >> About phone to Verify the new software version of the device.
How to fix boot loop issue
If the Galaxy Note 2 gets stuck at booting animation (afterstep-11) or experience boot loop then place the device into recovery mode by pressing and holding Home , Power and Volume Up buttons together. In recovery mode, perform data wiping box by Selecting Wipe data / factory reset . Now select wipe cache partition and once the action is completed, reboot the phone by Selecting reboot system now . In recovery mode, use Volume keys to scroll between options and Power button to select the Desired option. It Should be noted That performing wiping box will erase the internal memory data of the device.
[Source: Team Android]
To report problems or to leave feedback about this article, e-mail:
To contact the editor, e-mail:
This article is copyrighted by IBTimes.co.uk, the business news leader
No comments:
Post a Comment