Mobile Phone Prices: Galaxy S3 and Galaxy Note 2 Get Android 4.3 I9300XXUGMK6 and ...

Galaxy S3 GT-I9300 and Galaxy Note 2 GT-N7100 recently received two new Open Europe test firmwares, I9300XXUGMK6 and N7100XXUEMK9. These firmware have reportedly been leaked from Samsung’s test labs During the development process.

Though the Galaxy S3 firmware is now officially available as Over-The-Air (OTA) update, it is still inaccessible via Samsung KIES or Odin flash tool. In otherwords, Those Who can not wait for the official release of the manual downloads via KIES software can Proceed with our step-by-step guide given below for manually installing the new Open Europe test firmware on Galaxy S3 and Galaxy Note 2nd

Changes and Improvements in Android 4.3 Update

Open Europe test firmware brings a host of feature changes and improvements to the new Android 4.3 update

TRIM Support (Makes the device much faster)

Samsung KNOX [Only in Galaxy Note 2]

Samsung Wallet (Pre-loaded) [Only in Galaxy Note 2]

Core UI elements updated to the ones on the Galaxy S4 (Galaxy S4′s theme all over)

GPU drivers havebeen updated (Higher GPU benchmark scores)

New Lockscreen: Multiple Widgets, improved ripple effect than Android 4.1.2, probability to change clock size and set a personal message

New Screen Modes (From S4): Adapt Screen and Professional Photography

New Camera mode: Sound and Shot

New Additions in Notification Centre

Completely revamped the Settings UI (Tabbed interface – Exactly like the Galaxy S4)

Implementation of Voice Controls (Let’s you control various parts of the phone using voice commands – Galaxy S4 feature)

New Samsung Apps: Calculator, Clock, Contacts, Gallery, Music

New S-Voice (from Galaxy S4)

Android 4.3 I9300XXUGMK6 Firmware Details

Model: GT-I9300
Country: Open Europe
Version: Android 4.3
Chang List: 2168382
Build date: Thu, 28 November 2013 21:02:26 +0000
Product Code: UXO
PDA: I9300XXUGMK6
CSC: I9300OXAGMK6
MODEM: I9300XXUGMK6

Pre-requisites

1) Install USB Driver for Samsung Galaxy S3 to connect the phone to computer.

2) Enable USB Debugging Mode on phone to connect it with computer and use the Android SDK with it. [Press Menu >> Settings >> Applications . Now browse and click the Development option then check USB Debugging Mode .]

3) Back up important data and settings on the phone as the given procedure May wipe out all data on phone. It is recommended to backup data using custom recovery tools Such as CWM or TWRP.

4) Ensure That the Galaxy S3 has at least 80% battery charge.

5) The device Should be factory unlocked and not locked to a Particular carrier.

6) The phone will lose custom ROM after installing the official firmware. Also, the custom recovery will be replaced by R stock recovery.

7) The device will no longer have root access after official firmware is installed.

8) Android 4.3 XXUGMK6 official firmware works only with the Samsung Galaxy S3 GT-I9300. As Attempting to install the firmware on incorrect model May brick the device, Verify the model number of the Galaxy S3 by navigating to Settings >> About device >> Model number .

How to Install Android 4.3 I9300XXUGMK6 Open Europe test Firmware on Galaxy S3

Step 1: Download Android 4.3 Open Europe test firmware for Galaxy S3 to computer.

Download: I9300XXUGMK6_I9300OXAGMK6_OXA.zip

Step 2: Extract the downloaded firmware file to get a. tar.md5 file

Step 3: Download Odin3 v3.09 . Extract Odin zip to get Odin v3.09.exe

Step 4: Run Odin3 v3.09.exe on computer

Step 5: Restart the Galaxy S3 in Download Mode . To do so, first turn off the phone and wait for five to six seconds after the display is off. Press and hold Volume Down , Power and Home buttons together until a warning screen Appear. Then hit the Volume Up button to continue into Download Mode

Step 6: Connect the phone to your computer using the USB cable while it is still in Download Mode. On successful connection an Added message will Appear in Odin and overpriced one of the ID: COM boxes will turn blue with the COM port number.

Note: If the Added message fails to Appear, try another USB port located at the back of the computer. If Odin still fails to Recognise the phone, then reinstall the USB drivers.

Step 7: Click the AP button in Odin and select

AP_I9300XXUGMK6_2168382_REV00_user_low_ship.tar.md5 file

Add BL_I9300XXUGMK6_2168382_REV00_user_low_ship.tar.md5via BL button

Add MODEM_I9300XXUGMK6_REV02_REV04_CL1413323.tar.md5via CP button

Add CSC_OXA_I9300OXAGMK6_2168382_REV00_user_low_ship.tar.md5 via CSC button

Step 8: Verify Auto Reboot and F.Reset Time checkboxes are selected in the Option section in Odin. Uncheck Re-Partition option.

Step 9: Click the Home button in Odin to begin the firmware installation Which will take just a few minutes

Step 10: A PASS message with green background Appears in Odin once the flashing is completed, and the phone will restart or cancel. When The homescreen Appear, disconnect the USB cable connecting the phone to computer.

The Android 4.3 I9300XXUGMK6 Jellybean test firmware Should now be installed and running on the Galaxy S3. Navigate to Settings >> About phone to Verify the firmware installed on the phone.

How to Fix Boot Loop Issue

If the device encounters any issue Such as FC or Boot Loop, after the firmware installation, then boot the phone into recovery mode . Press and hold Volume Up , Home and Power buttons together. In recovery mode, perform data wiping box by Selecting Wipe data / factory reset . Then reboot the phone by Selecting reboot system now . NOTE: In recovery mode, use Volume keys to navigate between options and Power button to select Desired option. Performing wiping box will erase all data including internal SD card.

Android 4.3 N7100XXUEMK9 Firmware Details

Model: GT-N7100
Country: Open Europe
Version: Android 4.3
Chang List: 2138564
Build date: Thu, 20 November 2013 19:16:05 +0000
Product Code: OXX
PDA: N7100XXUEMK9
CSC: N7100OXXEMK4
MODEM: N7100XXUEMJ9

Pre-requisites

1) Install USB Driver for Samsung Galaxy Note 2 to connect the phone to computer.

3) Back up important data and settings on the phone as the given procedure May wipe out all data on phone. It is recommended to backup data using custom recovery tools Such as CWM or TWRP.

4) Ensure That the Galaxy Note 2 has at least 80% battery charge.

5) The device Should be factory unlocked and not locked to a Particular carrier.

6) The phone will lose custom ROM after installing the official firmware. Also, the custom recovery will be replaced by R stock recovery.

7) The device will no longer have root access after official firmware is installed.

8) Android 4.3 XXUEMK9 official firmware works only with Samsung Galaxy Note GT-N7100 2. As Attempting to install the firmware on incorrect model May brick the device, Verify the model number of the Galaxy Note 2 by navigating to Settings >> About device >> Model number .

class=”c25″> How to Install Android 4.3 N7100XXUEMK9 Open Europe test Firmware on Galaxy Note 2

Step 1: Download Android 4.3 Open Europe test firmware for Galaxy Note 2 to computer.

Download: N7100XXUEMK9_N7100XXUEMJ9_OXX.zip

Step 2: Extract the downloaded firmware file to get a. tar.md5 file

Step 3: Download Odin3 v3.09 . Extract Odin zip to get Odin v3.09.exe

Step 4: Run Odin3 v3.09.exe on computer

Step 5: Restart the Galaxy Note 2 in Download Mode . To do so, first turn off the phone and wait for five to six seconds after the display is off. Press and hold Volume Down , Power and Home buttons together until a warning screen Appear. Then hit the Volume Up button to continue into Download Mode

Step 6: Connect the phone to computer using the USB cable while it is still in Download Mode. On successful connection an Added message will Appear in Odin and overpriced one of the ID: COM boxes will turn blue with the COM port number.

Note: If the Added message fails to Appear, try another USB port located at the back of the computer. If Odin still fails to Recognise the phone then reinstall the USB drivers.

Step 7: Click the AP button in Odin and select

AP_N7100XXUEMK9_2138564_REV04_user_low_ship.tar.md5 file

Add BL_N7100XXUEMK9_2168382_REV00_user_low_ship.tar.md5 through the BL button

Add CP_N7100XXUEMJ9_REV08_CL1423182.tar.md5 via CP button

Add CSC_OXX_N7100OXXEMK4_2174777_REV04_user_low_ship.tar.md5 through the CSC button

Step 8: Verify Auto Reboot and F.Reset Time checkboxes are selected in the Option section in Odin. Uncheck Re-Partition option.

Step 9: Click the Home button in Odin to begin the firmware installation Which will take just a few minutes

The Android 4.3 N7100XXUEMK9 Jellybean test firmware Should now be installed and running on the Galaxy Note the second Navigate to Settings >> About phone to Verify the firmware installed on the phone.

How to fix the boot loop issue

Also Read: Apple Rolls Out iOS 7.1 Beta 2 for Developers with Bug Fixes [How to Install via Registered UDID]

[ Source: SamMobile]

Mobile Phone Prices

Monday, December 16, 2013

Galaxy S3 and Galaxy Note 2 Get Android 4.3 I9300XXUGMK6 and ... - International Business Times UK

No comments:

Post a Comment