Update Galaxy Note LTE N7105 2 to XXDMC3 Android 4.1.2 Jelly Bean Official ... - WCCFtech

Samsung has come up with a new firmware for the Galaxy Note 2 LTE N7105; XXDMC3 Android 4.1.2 Jelly Bean Official Firmware for users. The update includes various bug fixes and performance upgrades. While this update is available via KIES and it is recommended That You get it from there. If for some reason, you can not access the official update or would like not to wait and get it on your phone right now, here is a guide to update your Galaxy Note LTE N7105 2 to XXDMC3 Android 4.1.2 Jelly Bean Official Firmware.

Also, read: Guide to Root XXDMC3 Android 4.1.2 Jelly Bean on Galaxy Note LTE N7105 2

Disclaimer: This guide will be using ‘Odin’ as a took to flash the official firmware on your Galaxy Note LTE N7105 2. During the process, you might lose all your installed apps Existing and personal settings. It is there fore Necessary for you to follow the guide care fully. Also, please, do mind thatthis tutorial is only for Galaxy Note LTE N7105 2. Do not try this guide in any other Android device.

Android 4.1.2 Firmware XXDMC3 Details:

PDA: N7105XXDMC3
CSC: N7105COVDMC1
Version: 4.1.2
Date: April, 2013
Regions:

Download

1. Android 4.1.2 Jelly Bean N7105XXDMC3 for Galaxy Note LTE N7105 2
2. Odin 3:07

Update Galaxy Note LTE N7105 2 to XXDMC3 Android 4.1.2 Jelly Bean Official Firmware

1. Download and Extract N7105XXDMC3_N7105COVDMC1_COV.zip to get a file with. taking extension in the unzipped folder.
2. You will then extract Odin zip file to get Odin3 v3.07.exe.
3. Switch your phone off. And husband surethat you wait 5-6 seconds to confirm the complete power-down cycle.
4. You will then put your Galaxy Note 2 LTE N7105 phone into Download Mode by pressing and holding down the Volume Down button, alongside the Home and the Power button, until the screen flashes the Samsung Logo. After a few seconds of That, the phone will enter download mode.
5. Run Odin3 v3.07.exe with Administrator rights.
6. Connect your Galaxy Note 2 LTE N7105 with your PC. You will then see a notification Appear in Odin in the bottom left saying “Added!”. If for some reason, you do not see the said notification, try another USB port. If that too does not work, then reinstall the USB driver. Once you successfully see the “Added!” Notification in Odin, you are good to go. Also, check for COM port being depicted by a number in ‘yellow’ to make surethat you have successfully added your device.
7. Select the Following files in Odin at Their respectively tabs from extracted XXDMC3 firmware folder:
8. Click the ‘PDA’ Button, and select the. takes file extracted in Step 1.
9. Click the ‘Phone’ Button, and select fileswith * modem * in its name (Ignore, if this file does not exist file).
10. Click the ‘CSC’ Button, and select fileswith * csc * in its name (Ignore, if this file does not exist file).
11. Click the ‘PIT’ Button, and select the. pit file. Use only if you got it while extracting in step 1 above, otherwise ignore it.
12. In Odin window, make sure Auto Reboot and F. Reset Time check boxes are selected. Please make surethat Re-Partition checkbox is selected, only if you are using a. Pit file.
13. Hit the ‘START’ button to begin the flashing process.
    Once the flashing process is completed, the phone will Automatically reboot and you will see a ‘Green’ PASS notification in the top-left-most box. You can unplug the device from the computer now.

If you have Followed every point described in the guide, your Galaxy Note 2 LTE N7105 Should now be running Android 4.1.2 Jelly Bean build N7105XXDMC3. If there are any issues, feel free to post in the comments section for our staff to take a look at it.